Technical Quality Status Of Compactor Machine

 In highway construction, a compactor machine is a very important piece of equipment. No matter the subgrade, the ground base, base layer, and surface layer need to be well compacted to achieve a certain degree of compaction, improve the bearing capacity of the road, and prevent subsidence, moisture penetration, etc. With the rapid increase in traffic volume and the further development of highway construction, the construction department has put forward higher and higher requirements for compactor machines.

When a compactor machine is used for compaction, common problems are less than desired compactness and uneven surfaces. The compactness does not reach the expected value. First, the selected road roller is incompatible with the construction process used, and ultimately the expected compaction effect and productivity cannot be achieved. For example, the compaction of the foundation is too low, the selection of vibration parameters, the determination of the thickness of the auxiliary layer, the arrangement of the number of real sides, etc.; but the mechanical properties, structure, structure and physical parameters of the compacted material cannot be grasped, such as the relationship between the type of compacted material and the drum structure of the roller, the moisture content of the compacted material and its optimum difference in water content, etc. All of the above reasons will affect the compaction effect.



See More: https://fbroadroller.com/technical-quality-status-of-compactor-machine/

Tandem Roller

Grass Roller For Sale

Single Drum Roller

评论

发表评论

此博客中的热门博文

When Did Asphalt Pavement Exist?

图片
 1. Development history of asphalt pavement: About 600 AD, the first asphalt road was built in Babylon, but the technology was lost soon after. In 1712, taking the discovery of rock asphalt in Switzerland as an opportunity, it was subsequently discovered in Germany, France and other countries. Around 1850, France first used rock asphalt for road pavement. In 1854, a thin-layer asphalt pavement close to the present was built in Paris, which can be called the beginning of hot paved rock asphalt pavement. The rock asphalt used at that time was limestone infiltrated with 6-10% asphalt, which was broken into fine particles, heated, paved and rolled, and the asphalt pavement was formed. The maximum particle size is 2.5mm, and the powder particle size of 0.074mm can reach more than 40%, which became the advanced pavement structure at that time. The United States did not import a large amount of rock asphalt from France and Switzerland until after 1850, and began to build rock asphalt pavement
阅读全文

What should be paid attention to in the compaction of asphalt pavement?

图片
 After the asphalt mixture is paved, it enters the compaction process. The compaction of asphalt mixture is an important aspect of asphalt pavement construction, and it is a very important process. In the process of pavement compaction, it must be equipped with sufficient large-tonnage compaction equipment, and try to use the most advanced two-wheel vibration roller. The compaction of asphalt pavement generally includes the following aspects: The initial pressure of the road surface, the re-pressure of the road surface and the final pressure of the road surface. 1. Initial pressure of the road surface The initial pressure is the primary link of road surface compaction. This link is generally carried out directly after the mixture is paved. Slow rolling 2-3 times, the temperature of the initial pressing link is generally kept between 110-140 degrees Celsius. Therefore, as long as the compaction equipment with relatively small tonnage can play a very good effect. Under normal circumstanc
阅读全文